GSM-WARE

its used to flash DB2020 using diferent CID on phone and flash file
-use USB Interface
-on setting tick SIGNED MODE, ENABLE ALTERNATIVE SECURITY BYPASS, COMPLETE PHONE AFTER FLASH
-load Flash file
-klik FLASH and folow instruction on log window

today gsm-ware.com moved to new server

more powerfull, more stable,

DB2000, DB2010, DB2020, DB2030 :

SEMC (Sony Ericsson Mobile Communications) hardware platforms.
It’s something similar to chipset in PC.DB2000 (another name is Marita) is a GSM+3G(UMTS) capable platform, SE K600/K608/V600/Z800/W900, Sharp 802sh, 902sh, 903sh and LG 3G phones are based on it.DB2010/2012 (Marita compact) is GSM-only, non-3G, platform. Most not very old and modern SE phones like K300,K500,K700,K750,S700,W300,W550,W800,Z520,Z530 are based on this chipset.DB2020 is the newest product of SEMC. K800, K790, K610, Z710 etc, Sharp 904sh feature this most secure (from SE’s point of view) platform.
db2030 is 3G platform, new platform device sonyericsson like W880 & W888

A2:

A2: * Secure boot ROM is used on the access and application side to guarantee the integrity of software at startup. This includes code on all volatile and non-volatile storage. The secure ROM functions can also be used to verify integrity at run-time.
The Real truth story about A2 Platform device

CDA :

This “number” defines which variant of a specific firmware a phone is supposed to have.It lets among others SEUS (Sony Ericsson Update Service) know which language-pack/branding/bandlocks a phone is to be flashed with. A generic (unbranded) K750 for use in Scandinavia will be CDA102337/12, whilst a Telenor-branded K750 will be CDA102338/62. Both will be flashed with the same languages/dictionaries, but the latter will be flashed with Telenor-branded firmware.
Read more…

Basically, the process of flashing is divided into 10 steps.

Step 1 - Download all the necessary files. Choose your desired ROM, there are 2 ROMS for Typhoon, one comes with ClearType, one does not. With ClearType, the font looks better but Chinese font looks abit awful. So unless you want to read Chinese, download the ROM with ClearType. The same applies to Feeler and Amadeus. Download the Extras folder as well

[url=http://rapidshare.com/files/54634559/WM6.for.Typhoon.WWE.zip[/url]
Typhoon Clear Type
Feeler and Amadeus without ClearType
Feeler and Amadeus with ClearType
Extras

http://rapidshare.com/files/54439485/WM6.for.Typhoon.WWE.zip
http://rapidshare.com/files/54435753/WM6.for.Typhoon.WWE.ClearType.zip
http://rapidshare.com/files/54446615/WM6.for.Feeler.and.Amadeus.WWE.zip
http://rapidshare.com/files/54443046/WM6.for.Feeler.and.Amadeus.WWE.ClearType.zip
http://rapidshare.com/files/54448481/SPL-1.01.0064.zip
http://rapidshare.com/files/54448620/27M-SPL-1.01.0109.zip
http://rapidshare.com/files/54449651/Extra-20070908.zip

http://forum.xda-developers.com/showthread.php?t=326312

These files are obtained from this website, as I do not want to leech Andot’s bandwidth, I uploaded it to Rapidshare. There might be new versions in the future so I will update the links from time to time.

Step 2 - Ensure that your device is application unlocked, if you are unsure whether it is application unlocked or not, it does not harm to unlock it once again. Download SDA_ApplicationUnlock.zip. Then execute the exe file in it. You should see something like this. The purpose of running this application is to ensure that you can install any unsigned 3rd party application (which is the tool needed to SuperCID in the next step) . If your device is already application unlock, you can skip this step.

Step 3 - If your device is SuperCID, you can skip this step and proceed to Step 4, if you have no idea what is SuperCID, chances are your device are not. First, download SPV-Services which is the software you need to use to SuperCID. Extract it to a folder, let’s say on a desktop. You will see three files in it. Cert.cab , TyphoonNBFTools.dll and SPV-services.exe. Copy cert.cab to any location on your smartphone and install it.

Step 4 - Now run SPVServices.exe which was extracted in Step 3, you should see this. RAPI Init was successful means that your ROM is ready to be patched with 16 bytes of data to allow it to be flashed with any ROM, by clicking on Set CID, your warranty is void.

Step 5 - (If you have installed Ronswens WM5, you can skip this step) Now reboot your phone, once you have rebooted, download the new SPL, extract it and run Patched_RUU . Firstly, check the box ‘ I have understand…’ and click Next. Then tick the checkbox after following the 4 step and click Next. Lastly, it will verify the information on your smartphone and then prompt you with another window, click Update and then click next. It will start flashing the SPL to your phone, you will see the progress bar on both your screen and phone. DO NOT DISCONNECT THE PHONE or do anything funny at this period eventhough it might seem to have stalled at certain percentage !

Once you are done, your phone will reboot, then turn it off.

Read more…

Sarasoft has changed the values of Global Options registry settings.
So If you have problems in installing HWK 2.8 on 2nd PC then import the registry values by double clicking on the attached file to install HWK 2.8.

global-options

UFS_DCTxBB5 v2.0.8.0
———————-

1. New BB5 products:
RM-207,RM-235,RM-236,RM-257,RM-270,RM-277,RM-325,RM-328,RM-342,
RM-343,RM-345,RM-346,RM-352,RM-354,RM-355,RM-357,RM-358,RM-359,
RM-367,RM-378,RM-379,RM-386,RM-387,RM-396,RM-397,RM-400,RM-407,
RM-408,RM-409,RM-410,RM-411,RM-414,RM-416,RM-417,RM-418,RM-419,
RM-420,RM-422,RM-425,RM-436,RM-462
(6263,N78-1,N78-5,3555b,3555,3555c,6600f-1c6220c-1,N78-3,E66-1,E66-2,
E71-1,3600s,7610s,7610sb,E71-2,5610d-2,5610d-2b,6210s-1,7310cb,7310c,
6210s-5,6220c-5,6212c,6500c-5,6650d-1c,E71-3,6210s-1c,5320d-1,5220b,
5220,6600s-1c,5320,5320d-1b,5320,6210s-1b,E66-3,6124c-1,6122c,7210c,E71-5)
2. New DCT4 products:
RH-116,RH-117,RH-118,RM-391,RM-392,RM-393,RM-394,RM-395
(7070,7070b,1681c,2760h,2680s,2680s-2b,1680c-2,1680c-2b)
3. New DCT4+ UNL versions support:
1200 (RH-99 v5.51,v5.53), 1200b (RH-100 v5.32)
1208 (RH-105 v5.51,v5.53), 1208b (RH-106 v4.00,v4.11,v5.23,v5.32)
1650 (RM-305 v5.32,v5.51,v5.53)
1680c-2,1680c-2b (RM-394,RM-395 v5.61,v5.63)
2610,2610b (RH-86,RH-87 v6.73,v7.10)
2630 (RM-298 v5.61)
2760 (RM-258 v4.20,v5.61), 2760b (RM-259 v4.20,v5.61)
2760h (RM-391 v5.45)
4. Fixed minor bugs.
5. New Flash Update Pack 8.36.2.35145

Do not use external VPP adapter with RX2 enabled cables, since this will put VPP direct to RX2 and its possible to KILL the phone.

LG_GSM V 2.0.8.0
—————–

Read more…

alcatel KTFT EV-W200 gsm/wcdma phone for korea market

ever ktft ev-w200

Here procedure to unlock this phone

goto menu 8 contents
type 0
type in code 292310
goto 5 test menu
then 11 gcf test mode
and use either protocol_rel99
or rel5
phone’s unlocked

i have tested on K618, reball ic flash and make jumper cable to connect test point

first make test point cable, testpoint is +3.3 voltage, connected to specific pin.
we suggesting to use +3.3v battery
(battery ground MUST be connected with phone’s GROUND)

here the picture ( u can use original setool cable)

SETool Test Point

usage:
1. go to emptyboard fill & repair.
2. select any db2020 model.
3. press “TP STAGE #1″. read instructions and execute them.
4. press “TP STAGE #2″. read instructions and execute them.
5. phone is BROWN now.
6. staying on “emptyboard fill and repair” write correct gdfs_in_ssw format.
7. if flashing went fine, flash db2020 erom with needed CID.
8. phone now retail and repaired. fullflash phone as usual.

after SETOOL2 db2020 testpoint procedure phone FULLY working in “alternative security bypass” mode without ANY restrictions.

default user code: 1122, 3344, 1234, 5678

software version: *#800#
software version: *#900#

Restore factory settings: *#987*99#

Factory mode: *#987#
Enable COM port: *#110*01# -> Device -> Set UART -> PS Config -> UART1/115200

LCD contrast: *#369#
set default language: *#0000# Send
set English language: *#0044# Send

set English language (new firmware): *#001# Send

Engineer mode: *#110*01#

Authors
Mr_Mutabor, Flex4 & Dvsdigiman

Tool what you need :
1.  P2k_easy_tool_v39
2.  ramldr2_031
3.  L7e font
4.  L7 08DO Boot Loader
5.  FB 306 ( recomended)

1.  Flash phone with L7e Font using FB3 and wait until command close at Log FB3.
2.  unplug Cable and Battery
3.  Open P2K_Easy_Tool_v39, then select phone model  ( L7) then open ” Repair” then selected ” Full Repair PDS Zone”.
4.  Connects again data cable to phone without batt and compress ” Do Selected Job” then compress ” OK”.
5.  unplug Cable, then plug battery tide and admission bootloader mode. Sees bootloader yg as described. If had not 08D0 connects again cable, program open ramldr2_031 compress ” As of neodymium loader” then compress ” write boot”, then selected file boot ( 08D0).
6.  Program Cover ramldr2_031. Then Tried admission bootloader mode and sees result of its.
7.  If had as described 08D0, Flash with Mosterpack which you likes.

the Tool there are at attachment except P2K_easytool V39 and FB 3.0.6. please look for x’self.

Downgrade Tool