first make test point cable, testpoint is +3.3 voltage, connected to specific pin.
we suggesting to use +3.3v battery
(battery ground MUST be connected with phone’s GROUND)

here the picture ( u can use original setool cable)

SETool Test Point

usage:
1. go to emptyboard fill & repair.
2. select any db2020 model.
3. press “TP STAGE #1″. read instructions and execute them.
4. press “TP STAGE #2″. read instructions and execute them.
5. phone is BROWN now.
6. staying on “emptyboard fill and repair” write correct gdfs_in_ssw format.
7. if flashing went fine, flash db2020 erom with needed CID.
8. phone now retail and repaired. fullflash phone as usual.

after SETOOL2 db2020 testpoint procedure phone FULLY working in “alternative security bypass” mode without ANY restrictions.

I.TRANSFER JAVA
1. Turn ON phone without shim
2. Connects phone with cable usb
3. Open VNavigator then Seting port*
4. Closed VNavigator then open again**
5. Now copy of java midlet ” vipergsm“*** to phone****
6. Close VNavigator

II. RUN JAVA MIDLET IN PHONE
7. Run x65PapuaUtils and seting port
8. Click Imulate SIM/simsim*****
9. Run java midlet (vipergsm) in phone******
10. “for session” select OK
11. “Allow java to access data cable?” select YES
12. Wait until HASH, ESN & IMEI showed

III. UNLOCKING
13. Open x65PapuaUtils and chooses phone type/input HWID
14. Select Px65v4
15. Select Calculate Skey and Bkey
16. Now Kills ponsel
17. Choose Service Mode ( Press power shortly)
18. Wait until exit PING*******
19. Choose Enter Skey in phone
20. Security must turn into FactoryMode********
21. If security still CustomerMode click New 512x SAVE and YES
22. Select 5008 Code phone

DESCRIPTION : :
===========

* ——- Sees cable port that detect by computer at device manager
** —— If program indirectly detects phone
*** —– Copy of directly from folder vipergms is not /file
**** —- Data | clock | Application |
***** — Functions to access phone menu without SIM so that we can implement
****** — Data | Application | vipergsm
******* – now ponsel in condition of service mode
********- sees panel under program

Good Luck

original posted by oxphonez on phone repair forum translate by gsm-ware