Step 1 – Download all the necessary files. Choose your desired ROM, there are 2 ROMS for Typhoon, one comes with ClearType, one does not. With ClearType, the font looks better but Chinese font looks abit awful. So unless you want to read Chinese, download the ROM with ClearType. The same applies to Feeler and Amadeus. Download the Extras folder as well

[url=http://rapidshare.com/files/54634559/WM6.for.Typhoon.WWE.zip[/url]
Typhoon Clear Type
Feeler and Amadeus without ClearType
Feeler and Amadeus with ClearType
Extras

http://rapidshare.com/files/54439485/WM6.for.Typhoon.WWE.zip

http://rapidshare.com/files/54435753/WM6.for.Typhoon.WWE.ClearType.zip

http://rapidshare.com/files/54446615/WM6.for.Feeler.and.Amadeus.WWE.zip

http://rapidshare.com/files/54443046/WM6.for.Feeler.and.Amadeus.WWE.ClearType.zip

http://rapidshare.com/files/54448481/SPL-1.01.0064.zip

http://rapidshare.com/files/54448620/27M-SPL-1.01.0109.zip

http://rapidshare.com/files/54449651/Extra-20070908.zip

http://forum.xda-developers.com/showthread.php?t=326312

These files are obtained from this website, as I do not want to leech Andot’s bandwidth, I uploaded it to Rapidshare. There might be new versions in the future so I will update the links from time to time.

Step 2 – Ensure that your device is application unlocked, if you are unsure whether it is application unlocked or not, it does not harm to unlock it once again. Download SDA_ApplicationUnlock.zip. Then execute the exe file in it. You should see something like this. The purpose of running this application is to ensure that you can install any unsigned 3rd party application (which is the tool needed to SuperCID in the next step) . If your device is already application unlock, you can skip this step.

Step 3 – If your device is SuperCID, you can skip this step and proceed to Step 4, if you have no idea what is SuperCID, chances are your device are not. First, download SPV-Services which is the software you need to use to SuperCID. Extract it to a folder, let’s say on a desktop. You will see three files in it. Cert.cab , TyphoonNBFTools.dll and SPV-services.exe. Copy cert.cab to any location on your smartphone and install it.

Step 4 – Now run SPVServices.exe which was extracted in Step 3, you should see this. RAPI Init was successful means that your ROM is ready to be patched with 16 bytes of data to allow it to be flashed with any ROM, by clicking on Set CID, your warranty is void.

Step 5 – (If you have installed Ronswens WM5, you can skip this step) Now reboot your phone, once you have rebooted, download the new SPL, extract it and run Patched_RUU . Firstly, check the box ‘ I have understand…’ and click Next. Then tick the checkbox after following the 4 step and click Next. Lastly, it will verify the information on your smartphone and then prompt you with another window, click Update and then click next. It will start flashing the SPL to your phone, you will see the progress bar on both your screen and phone. DO NOT DISCONNECT THE PHONE or do anything funny at this period eventhough it might seem to have stalled at certain percentage !

Once you are done, your phone will reboot, then turn it off.

Step 6 – Remove the USB cable, and disable Active Sync USB connection. Open Microsoft Active Sync, click File -> Connection Settings -> Untick allow USB connection

So now that you got your device turned off, remove the USB cable.

Step 7 – Now you need to access the bootloader. Ensure that the phone is turned off, hold the camera button with a hand, and connect the USB cable, after a second, you will see a white screen asking ‘Need an IU? “, press 0 and you will see a 3 colour screen which is the bootloader

Step 8 – Now extract the ROM which you have downloaded earlier on to your C: drive, then execute mtty.exe. Select USB from the drop down menu and click OK.

Step 9 – Now type ‘l c:/os.bin’ without the quotes and type enter, you will see a series of process. The entire process takes around 10-20 minutes. Please be patient. Once it is done, type ResetDevice, and you have WM6.

Step 10 – Now you need to choose which camera driver you are using depending on what camera your phone uses. If its 0.3MP, then choose 0.3 and the same applies to 1.3MP. To set the camera driver, hit Start -> Settings -> More -> More -> Camera driver. Choose and click done. Then extract the Extras folder which you have downloaded earlier and install the apps which you need.

1) Celetask is a better task manager which can be accessed by holding the Home button after it is installed
2) WM5Storage now works on WM6, the USB driver has been replaced
3) Install the approriate camera software, or your phone might just hang
4) HTC Album is extracted from Windows Mobile 2003, just incase you want the classic akbum

The last thing you need to do is enable back USB connection which is the reverse of Step 6.

Click for T9 English and T9 Chinese

I hope this guide will make it easier to flash their phone. Let me know if any info can be added or any info is wrong in it.

Thanks to http://karhoe.net/

1. New BB5 products:
RM-207,RM-235,RM-236,RM-257,RM-270,RM-277,RM-325,RM-328,RM-342,
RM-343,RM-345,RM-346,RM-352,RM-354,RM-355,RM-357,RM-358,RM-359,
RM-367,RM-378,RM-379,RM-386,RM-387,RM-396,RM-397,RM-400,RM-407,
RM-408,RM-409,RM-410,RM-411,RM-414,RM-416,RM-417,RM-418,RM-419,
RM-420,RM-422,RM-425,RM-436,RM-462
(6263,N78-1,N78-5,3555b,3555,3555c,6600f-1c6220c-1,N78-3,E66-1,E66-2,
E71-1,3600s,7610s,7610sb,E71-2,5610d-2,5610d-2b,6210s-1,7310cb,7310c,
6210s-5,6220c-5,6212c,6500c-5,6650d-1c,E71-3,6210s-1c,5320d-1,5220b,
5220,6600s-1c,5320,5320d-1b,5320,6210s-1b,E66-3,6124c-1,6122c,7210c,E71-5)
2. New DCT4 products:
RH-116,RH-117,RH-118,RM-391,RM-392,RM-393,RM-394,RM-395
(7070,7070b,1681c,2760h,2680s,2680s-2b,1680c-2,1680c-2b)
3. New DCT4+ UNL versions support:
1200 (RH-99 v5.51,v5.53), 1200b (RH-100 v5.32)
1208 (RH-105 v5.51,v5.53), 1208b (RH-106 v4.00,v4.11,v5.23,v5.32)
1650 (RM-305 v5.32,v5.51,v5.53)
1680c-2,1680c-2b (RM-394,RM-395 v5.61,v5.63)
2610,2610b (RH-86,RH-87 v6.73,v7.10)
2630 (RM-298 v5.61)
2760 (RM-258 v4.20,v5.61), 2760b (RM-259 v4.20,v5.61)
2760h (RM-391 v5.45)
4. Fixed minor bugs.
5. New Flash Update Pack 8.36.2.35145

Do not use external VPP adapter with RX2 enabled cables, since this will put VPP direct to RX2 and its possible to KILL the phone.

LG_GSM V 2.0.8.0
—————–

v 2.0.8.0 (HWK Required)
——-
1. Added “FSct0″ (Force Sector 0 Overwrite) Checkbox in
Infineon platform.
Use it for Frozen or blinking phones (KE800,..)
2. KP130, KP210, KP215, KP260, KP265 support added.

SAMs V 2.0.8.0
—————

TRIDENT
S730i (DUNL,IM,FL)added.
B200,B300 DUNL and IM fixed.
Reserved Regions values revised and fixed.
MSL Repair enhanced, and added for following products:
C17x,C26x,C520,E84x,E90x,E95x,F21x,M300,M60x,P520, U10x,U30x,X82x
“Erase NOR” activated.
Enhanced 4CC protocol handler (fixed error on PC busy)
TRIDENT VISION
E21x,J60x fixed (INF,DUNL,IM)
M310 added (FL,CUNL)
Enhanced 4CC protocol handler (fixed error on PC busy)
OM(SYSOL)
A117,C288,M130L added (DUNL,IM,FL,SECT)
E746 bug fixed.
SWIFT
D780,D788(Duos2),D828E,E251,E251C,E258D,F110,G808E ,J210,L310,
P180,P200,P260,P850,P858,T309,T509,U908E,X700N (DUNL,FL,SECT)
F488E,J150 (FL,CUNL) Use ‘Unlock E2P’ to see Codes.
E35x,E37x,T809 DUNL, SECT and IM fixed.
E480,E488 bug in DUNL,SECT fixed.
D880-Duos flashing bug in 2.0.7.2 fixed.
X700 SECT fixed.
SWIFT-AEROFONE
B130 introduced(FL,CUNL) Use ‘Unlock E2P’ to see Codes.
QUALCOMM
A411,A412,A701,A706,A707,A711,A717,A727,A736,A737, A801,A817,
F330,F338,F400,F408,F480,F488,F490,F510,F550,F700, G400,G800,
G800B,G800L,G808,J200,J200L,J208,J630,J638,L170,L7 60,L760G,
L768,L810,L811,P910,P920,P940,P950,P960,T639,T819, U700,U700B,
U708,U800,U800F,U900,U900U,U908,V705,V706,V707,V70 8,Z150,Z170,
Z230,Z238,Z240,Z240E,Z248,Z310,Z360,Z368,Z400,Z540 ,Z548,Z560,
Z570,Z720,Z728,Z740,ZV40,ZV50,ZV60 introduced (FL,INF,REUL)
COMMON
Product Langpacks description added (Info and MCU-Open)
Note, real menu languages can differ from listed here,
for different models, firmware versions. Languages in
brackets is not mandatory for current Region.

SeDBx v2.0.8.0
—————

DB2010
1. Added Support for: 36Brown, 49Brown
DB2012
1. Added Support for: 50Brown, 51Brown, 51Red, 53Red.
2. Added CID Upgrade.
DB2020
1. Added Support for: 49Brown.
2. Loaders Updated.
PNX5230
1. Added Support for: 49Brown, 52Brown.
2. Loaders Updated.

USB Drivers are installed to X:\Program Files\SarasSoft\UFS\UFS_DBX\USBFlashDriver

SeDBx Quick Guide has been updated.

The Official release is ready in our download area http://sarunasoftware.com.

Please follow the instructions careful on the above page.

The Update Client is launched after HWK Support Suite install, if you cancel without making the update, you can run the Update Client again, by selecting the shortcut on the Start Menu:-
Programs\SarasSoft\UFS\Utilities\Update Client

WARNING !!!
If the HWK is a “TRIAL” or affected by 3rd party tools, this software may not work properly, so use at your own risk.

HWK_Setup_Suite_v02.08.000.exe + HWK_Support_Suite_Setup_v02.08.000.exe = 74MB

http://rapidshare.com/files/145345738/HWK_Setup_Suite_v02.08.000.rar